Termination Load N Male 100W

AED185.00
In stock
Product Model
L100NM
N TYPE Terminator is used to terminate the extra N Female ports in RF Power Splitters, Power directional couplers and Power attenuators. The characteristic impedance is 50 Ohms. Main advantages of Astel Terminator Load are, frequency range 0-3 GHz, finned termination for excellent heat dissipation, Low PIM, and low VSWR. Astel Terminator offers great vibration performance, excellent mechanical and electrical performance etc. This type is most widely used in Radio communication equipment, microwave test and ground launch systems, and electronic instruments.
N TYPE Terminator is used to terminate the extra N Female ports in RF Power Splitters, Power directional couplers and Power attenuators. The characteristic impedance is 50 Ohms. Main advantages of Astel Terminator Load are, frequency range 0-3 GHz, finned termination for excellent heat dissipation, Low PIM, and low VSWR. Astel Terminator offers great vibration performance, excellent mechanical and electrical performance etc. This type is most widely used in Radio communication equipment, microwave test and ground launch systems, and electronic instruments.
More Information
Technical specification
 
 
Technical Characteristics Termination Load N Male-100W
Impedance 50Ω
Frequency DC-3.8 GHz
Contact resistance Center ≤1 mΩ
Outer ≤ 1 mΩ
Insertion loss Not applicable
VSWR Straight ≤ 1.2 / 3 GHz
Power Handling 100W
 PIM (IM3) <110 dBc @ 2x43dBm, Low PIM
Insulation Resistance ≥ 1500 MΩ
Working Voltage 1000 Vrms
Withstand voltage 2500Vrms
Center Conductor Retention force ≥ 0.56 N
Coupling Nut Retention Force ≥ 450 N
Durability 500 (cycles)
Vibration 100m/s2 (10-500 Hz) 10g
Working Temp Range -35 ~ +65°C
Mechanical Specifications  
Connector N Male
Dimensions 120 x100x62 mm
Net Weight 0.600 Kg
Material and Plating  
Body Part Material Plating
Connector Body Brass (Gold Nickel Plated    ies)
plated-GGT Ser
 Heat Sink Body Aluminum Black Anoidized
Contact pin Brass/Phosphorus Bronze Gold or Silver Plated
Socket contact Beryllium copper Gold or Silver Plated
Insulator PTFE -
O ring Sealing 6146 Silicone rubber -
 
Applicable standard
IEC-60169-16 (For reference only*), MIL-C-39012 (For reference only*)
*- These standards are quoted for reference only. It does not mean that the products offered below are complied with these standards. For connectors to match with the respective standards-Astel Digicom will specifically mentioned with the connector.
 
 
 
Disclaimer
1. Astel Digicom Electronics reserves the right to change, modify specifications without prior notice.
2. All pictures are for illustrative purposes only. Actual product may be different in color and size that may appear in product specifica-
4. E&OE (Errors and Omissions are excepted).
3. Every effort is made to provide accurate information at the time of publishing, however Astel Digicom Electronics LLC is not responsible
for any loss, directly or indirectly caused by any error in publishing.