Mini Din 4.3-10 Male Right Angle Clamp type for 1/2 Inch Superflex 1/2SF

AED 25.00
In stock
Product Model
MDINMALCLM12SFRA
Connector4.3-10 MDIN Male Right Angle for
Superflex Cable (1/2" SF)
Body: Brass with Ni Plating
Pin: Silver Plated
Impedance: 50Ω
Connector 4.3-10 MDIN Male Right Angle for
SuperFlex Cable (1/2" SF)
Body: Brass with Tri-Alloy Plating
Center Contact: Tin Bronze with Silver plating
Fastener: Brass with Nickel plating
Dielectric: PTFE
Impedance: 50Ω
More Information
Technical specification
Main Features:
Mating cycles    ≥500 times
Termination cable retention   ≥500N
Apply with the electric cable 1/2” low loss Feeder Cable
Temperature range -40°Cto +85°C
Environmental standards RoHS
 Electrical Specications:  
 Parameter  Specications
 Impedance  50 ohm
 Frequency 0-7.5GHz
 VSWR ≤1.10 (0-2.2GHz); ≤1.15 (0-3GHz)
 Dielectric strength ≥4000V RMS, at sea level
 Dielectric Resistance  ≥10000MΩ
Insertion Loss ≤0.09dB (@2200MHz)
 Center contact resistance  ≤0.4mΩ
 Outer contact resistance ≤0.2mΩ
PIM (900MHz, 1800MHz 2×20W) ≤-155dBc
Interface according to IEC 60169-4
Material and plating:
Parameter Specications
Connector parts Material Plating
Outer contact Brass CuSnZn3
Center contact Tin bronze Ag3 Silver
Fastener Brass Ni3
Dielectric PTFE -
 
Disclaimer
1. Astel Digicom Electronics reserves the right to change, modify specifications without prior notice.
2. All pictures are for illustrative purposes only. Actual product may be different in color and size that may appear in product specifica-
3. E&OE (Errors and Omissions are excepted).
4. Every effort is made to provide accurate information at the time of publishing, however Astel Digicom Electronics LLC is not responsible for any loss, directly or indirectly caused by any error in publishing.