UNSHIELDED KEYSTONE JACK CAT6 TOOLLESS

AED0.00
In stock
Product Model
KSJ-CAT6-TTL
Astel Digicom CAT6 KSJ has been designed for high speed voice and data applications and exceeds all ANSI/TIA/
EIA 568B2 and ISO/IEC 11801 standards requirements. Astel KSJ-CAT6-XX can be used with Astel CAT6 cable and
accessories to construct a link or channel with category 6 performance
Astel Digicom CAT6 KSJ has been designed for high speed voice and data applications and exceeds all ANSI/TIA/ EIA 568B2 and ISO/IEC 11801 standards requirements. Astel KSJ-CAT6-XX can be used with Astel CAT6 cable and accessories to construct a link or channel with category 6 performance.
More Information
Technical specification
Category 6 Unscreened Keystone Jack, is an independently verified toolless termination RJ45 socket suitable for mounting in range of housings from patch panels, faceplates and shutters to sub floor boxes, and work area distribution enclosures. The socket itself is housed in a high quality ABS plastic housing, which opens at the rear in a butterfly manner to reveal the IDC termination points. Once the conductors of the cable to be terminated are fed into a wire cap the process is completed by snapping the ‘butterfly wings’ together with minimal, but firm pressure.
 
Category 6 keystone jack is designed and manufactured to comply with the requirements of Category 6/Class E as defined in ISO 11801 2nd edition, and TIA/EIA 568 B.2 1. A range of performance characteristics are tested up to 250Mhz including return loss, attenuation, and near end cross talk (NEXT) and far end cross talk (FEXT). Both worst case and power sum test methods are applied. The keystone jack is fully interoperable and backward compatible with Category 5e products.
 
Main Features
 
1) Supports Gigabit Ethernet
2) Independently Verified Suitable for patch panel and faceplate mounting
3) Suitable for installation in 27mm deep back box with bevelled faceplate
4) LSA Punchdown Termination
5) Complies with the following standards:
     1) ISO/IEC 11801 2nd edition.
     2) TIA/EIA 568B2.1.
 
Applications
 
1) 1000BASE-T Gigabit Ethernet
2) 100BASE-TX Fast Ethernet
3) 10 Base-T Ethernet
4) 622Mbps ATM
5) 155Mbps ATM
6) ISDN
7) FDDI
 
Technical Specifications KSJ-CAT6-TTL
Specification Category 6 ISO TIA/EIA -568-B.2-1 Cat 6
Wiring Specification T568A & T568B
Dimensions 17mm wide x 35.15mm deep x 25.20mm high
Installation Recommendation Suits minimum of 37mm back boxes when installed with beveled faceplate
Jack housing High impact, Flame Retardant Plastic, UL 94V-0
Min life Min life 750 insertions
Contacts 3um (RJ45) Gold plate over 100um Nickel
NEXT at 250MHz Category 6 39.1dB @250MHz (Power Sum)
EL FEXT at 250MHz Category 6 27.0dB @250MHz (Power Sum) Storage
Temperature Range -40 to +70°C
Operational Temperature Range -20 to +60°C