SMA Female Crimp type Gold Series

AED0.00
In stock
Product Model
SMA-FEM-CRM-58-GGT
SMA connector has small size thread coupling. Its characteristic Impedance is 50 Ohms. It can perfectly match Flexible cable where frequency is below 12.4 GHz, and semi rigid cable where frequency can be as high as 18 GHz. It has strong mechanical performance and can be used in wide range of frequency. It is widely used in WIFI , WLAN, aviation, radar, microwave communication, digital communication etc
SMA connector has small size thread coupling. Its characteristic Impedance is 50 Ohms. It can perfectly match Flexible cable where frequency is below 12.4 GHz, and semi rigid cable where frequency can be as high as 18 GHz. It has strong mechanical performance and can be used in wide range of frequency. It is widely used in WIFI , WLAN, aviation, radar, microwave communication, digital communication etc
More Information
Technical specification
SMA FEM CRM-58-GGT
SMA FEM Crimp RG-58
Body :Brass with Ni Plating, Pin: Gold plated, Impedence :50Ω
 
Technical Characteristics SMA CONNECTORS
Impedance 50Ω
Frequency DC-12.4 GHz (Flexible cable)
DC-18.0 GHz (Semi Rigid cable)
Contact resistance Center ≤3 mΩ
Outer≤ 2.5 mΩ
Insertion loss ≤0.15 dB / 6GHz
VSWR Straight ≤ 1.20
Right angle ≤ 1.30
Insulation Resistance ≥ 5000  MΩ
Working Voltage 335 Vrms
Withstand voltage 1000Vrms
Center Conductor Retention force ≥ 0.28 N
Coupling Nut Retention Force ≥ 180 N
Durability 500 (cycles)
Working Temp Range -55 ~ 85°C
Material and Plating  
Body Part Material PLating
Body Brass Gold Plated
Contact pin Brass Gold Plated
Socket contact Beryllium copper Gold plated
Insulator PTFE -
Crimp Ring Copper Alloy Gold Plated
O ring Sealing 6146 Silicone rubber -
 
Applicable standard
IEC-60169-8 (For reference only*), MIL-C-39012 (For reference only*)
*- These standards are quoted for reference only. It does not mean that the products offered below are
complied with these standards. For connectors to match with the respective standards-Astel Digicom will
specifically mentioned with the connector.
 
 
 
Disclaimer
1. Astel Digicom Electronics reserves the right to change, modify specifications without prior notice.
2. All pictures are for illustrative purposes only. Actual product may be different in color and size that may appear in product specifica-
3. E&OE (Errors and Omissions are excepted).
4. Every effort is made to provide accurate information at the time of publishing, however Astel Digicom Electronics LLC is not responsible
for any loss, directly or indirectly caused by any error in publishing.